bkaii.com.vn BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!

IDS-409-SFP: Switch công nghiệp 9 cổng Compact DIN Rail

Giá: Liên hệ

IDS-409-SFP Switch công nghiệp 9 cổng Compact DIN Rail của hãng Perle-Canada hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.IDS-409-SFP được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng.Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …

Switch công nghiệp

Tính năng của sản phẩm:

10/100/1000Base-T ( RJ45 ) ports for Gigabit and Fast Ethernet devices
100/1000Base-X SFP fiber ports (empty)
IP Manageability, VLAN and resiliency management
Digital inputs for generation of alerts
Compact, corrosion resistant case attaches to a standard DIN Rail
Redundant dual power input 12/24/48 VDC, 24 VAC
Out-of-band management via RJ45 or USB serial ports
Programmable Controller safety and Hazardous Location Certification
-40 to 75C industrial operating temperature ( XT Models )

Thông số kỹ thuật của sản phẩm:

Power
Dual Power Input	Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. ( 9.6 to 60 VDC) 24 VAC Nominal ( 18 to 30 VAC )
Power Connector	4-Pin Removable Terminal Block. Grounding screw on metal chassis
Maximum Current Consumption @24 vDC	1 SFP = 0.66 amps 2 SFP = 0.58 amps 3 SFP = 0.61 amps 5 SFP = 0.61 amps
Maximum Power Consumption @24 vDC	1 SFP = 15.8 watts 2 SFP = 14 watts 3 SFP = 14.7 watts 5 SFP = 14.7 watts
Overload Current Protection	Fused overload current protection
Reverse polarity protection	The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45	4, 6, 7 or 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft ) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V
RJ45 Serial Console port	RJ45 DTE Optional rolled and straight thru RJ45 cables and DB adapters are available
Small Form Factor Pluggable ( SFP ) slot	1,2 or 3 SFP slots for SERDES 100/1000Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs SFPs supporting the SGMII protocol are also supported ( example 1000Base-T )
USB Serial Console port	MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
Digital Inputs	Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of on-board Alarm Relay,etc )
Alarms
NC (Normally Closed ) or NO ( Normally Open ) dry contact. 1A @ 24V
Switch Properties
Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T EEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control
Processing Type	Store and Forward
MAC Address Table Size	8K
VLAN ID range	1 to 4000
IGMP groups	1024
Packet Buffer Memory	1 Mbit
Jumbo Frame Size	10 KB
Indicators
Power	This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
System	Indicates whether the switch O/S is operating normally
RJ45 Ethernet	These integrated colored LEDs indicate link, activity and speed for each port.
Fiber Link	Fiber link LED indicates Link and Data Activity
Alarm	The alarm LED ( Red ) will be turned on under alarm conditions
P-Ring Master LED	Status of the P-Ring Master
Backup Network Coupling	Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links connecting two P-Ring networks )
External Configuration DIP Switches
S2	When enabled, designates this switch as the Ring Master
S1	Activate Backup Coupling between 2 ring networks
Environmental Specifications
MTBF	1 SFP = 123,553 Hours 2 SFP = 121,803 Hours 3 SFP = 120,102 Hours 5 SFP = 116,839 Hours Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
Operating Temperature Ranges	Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F). XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40 F to 167° F )
Storage Temperature Range	Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range	5% to 90% non-condensing
Storage Humidity Range	5% to 95% non-condensing
Maximum Heat Output	1 SFP = 53.9 Btu/hr 2 SFP = 47.8 Btu/hr 3 SFP = 50.2 Btu/hr 5 SFP = 50.2 Btu/hr
Operating Altitude	Up to 3,048 meters (10,000 feet)
Chassis	Metal with an IP20 ingress protection rating
Din Rail Mountable	DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight	1.5 kg
Dimensions	75 x 130 x 121mm
Packaging
Shipping Weight	2.0 kg
Shipping Dimensions	170 x 260 x 70 mm

Mã sản phẩm:

Model	Temp	RJ45 ports 10/100/1000Base-T	SFP Slots (empty) 100Base-X 1000Base-X
IDS-409-1SFP	Std	8	1
IDS-409-1SFP-XT	Ind	8	1
IDS-409-2SFP	Std	7	2
IDS-409-2SFP-XT	Ind	7	2
IDS-409-3SFP	Std	6	3
IDS-409-3SFP-XT	Ind	6	3
IDS-409-5SFP	Std	4	5
IDS-409-5SFP-XT	Ind	4	5

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"