VPort P16-2MR80M: EN50155, day & night, IR, 1080P IP Camera, 8.0 mm lens, PoE, M12 connector, -25 to 55°C operating temperature của hãng Moxa hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. VPort P16-2MR80M được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng.Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh,….
Tính năng của sản phẩm:
- Supports up to 4 video streams simultaneously for H.264 and MJPEG
- Up to Full D1 resolution (720 x 480) @ 90 fps for 3 video streams with legacy analog video images
- Video latency under 200 ms
- 2 Ethernet ports for cascading or Ethernet port redundancy
- DynaStream™ for optimized network efficiency
- ONVIF support for standardization and interoperability
- Local storage capability with SD card slot
- Industrial design with -40 to 75°C operating temperature range
Thông số kỹ thuật của sản phẩm:
Memory
Input/Output Interface
Digital Input Channels
|
2
|
Digital Inputs
|
+13 to +30 V for state 1
-30 to +1 V for state 0 Max. input current: 8 mA
|
Relay Channels
|
2
|
Contact Current Rating
|
Resistive load: 1 A @ 24 VDC
|
Connector
|
Terminal block
|
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
|
2
|
Ethernet Software Features
Protocols
|
TCP/IP
IPv4/IPv6 UDP HTTP RTP/RTSP ARP UPnP
FTP TFTP
NTP Client DNS
QoS IGMP v3 ICMP
SNMPv1/v2c/v3 Modbus TCP HTTPS
802.1X NTCIP
|
Security Functions
Password
|
User-level password protection
|
Filter
|
IP address
|
Authentication
|
802.1X
|
Encryption
|
HTTPS SSH
|
LED Interface
LED Indicators
|
STAT: Indicates if system is booted up properly or not Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps
|
Serial Interface
PTZ Port
|
1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
|
COM Port
|
1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
|
Console Port
|
1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
|
Power Parameters
No. of Power Inputs
|
2
|
Input Voltage
|
Redundant dual inputs
|
Operating Voltage
|
12 to 32 VDC, 18 to 30 VAC
|
Input Current
|
0.64 A @ 12 VDC, 0.18 A @ 32 VDC
0.59 A @ 18 VAC
0.35 A @ 30 VAC
|
Power Connector
|
2-pin terminal block
|
Video Interface
Video Compression
|
H.264 (ISO/IEC 14496-10) or MJPEG
|
Video Input
|
1, BNC connector (1.0 Vpp, 75 ohm)
|
Video Output
|
via Ethernet
|
Video Streams
|
4 independent H.264 or MJPEG video streams
|
NTSC/PAL
|
Auto-sensing or manual
|
Video Resolution and FPS (frames per second)
|
|
Video Viewing
|
DynaStream™ support for changing the video frame rate automatically CBR Pro™ for good image quality in limited bandwidth transmissions Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Image tuning: control brightness, contrast, saturation
Maximum of 10 simultaneous unicast connections, 50 multicast clients
|
|
NTSC
|
PAL
|
Size
|
Max. FPS
|
Size
|
Max. FPS
|
QCIF
|
176 x 112
|
30
|
176 x 144
|
25
|
CIF
|
352 x 240
|
30
|
352 x 288
|
25
|
VGA
|
640 x 480
|
30
|
640 x 480
|
25
|
4CIF
|
704 x 480
|
30
|
704 x 576
|
25
|
Full D1
|
720 x 480
|
30
|
720 x 576
|
25
|
|
|
Audio Interface
Audio Inputs
|
1 Line-in or MIC-in with 3.5 mm phone jack
|
Audio Outputs
|
1 Line-out, with 3.5 mm phone jack
|
Audio Format
|
Mono, PCM (G.711)
|
Camera Software Development
Video Standards
|
ONVIF Profile S
|
Camera PAN/TILT/ZOOM
PTZ Camera Control
|
Via PTZ port or COM port
|
PTZ Control Functions
|
Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
|
PTZ Function Updates
|
Driver upload supported
|
Protocols
|
Pelco D, Pelco P, Custom Camera
|
Camera Alarm Software Features
Intelligent Video
|
Camera tampering detection
|
Video Motion Detection
|
3 independently configurable areas
|
Scheduling
|
Daily repeat timing schedule
|
Imaging
|
JPEG snapshots for pre/trigger/post alarm images
|
Custom Alarms
|
HTTP event servers for setting customized alarm actions
|
FTP Messaging
|
Automatic transfer of stored images via FTP as event-triggered actions
|
Pre-Alarm Buffer
|
50 MB video buffer for JPEG snapshot images
|
Video Recording
|
Event recordings stored on the SD card
|
Software Requirements
Memory Size
|
1 GB
|
Operating System
|
Windows 7 or above
|
Browser
|
Internet Explorer 9.x or above
|
Multimedia
|
DirectX 9.0C or above
|
Physical Characteristics
Housing
|
Metal
|
Dimensions
|
46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
|
Weight
|
710 g (1.57 lb)
|
Installation
|
DIN-rail mounting
Wall mounting (with optional kit)
|
Environmental Limits
Operating Temperature
|
Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
Storage Temperature (package included)
|
-40 to 85°C (-40 to 185°F)
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
Altitude
|
2000 m
|
Standards and Certifications
EMI
|
CISPR 32, FCC Part 15B Class A
|
EMS
|
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
|
Freefall
|
IEC 60068-2-31
|
Safety
|
UL 60950-1
|
Shock
|
IEC 60068-2-27
|
Vibration
|
IEC 60068-2-6
|
MTBF
Time
|
862,568 hrs
|
Standards
|
Telcordia SR332
|
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"