65M-2901-CT-T: I/O modules for modular programmable IIN controllers

Digital Input Channels

65M-1900-CT-T: 32

Digital Output Channels

65M-2901-CT-T: 32

Analog Input Channels

65M-3600-CT-T: 16 (current)

65M-3610-CT-T: 16 (voltage)

Analog Output Channels

65M-4820-CT-T: 8

Isolation

65M-3600-CT-T/65M-3610-CT-T/65M-4820-CT-T:

System: 3k VDC

Signal: 1k VDC (between group for 1 min) All other models:

System: 3k VDC Signal: 3k VDC

I/O Type

Sink

(Internal/external sensor supply for dry contact)

I/O Mode

DI or event counter

(channels 1 to 8, group configurable by software)

Input Voltage

On: 11 to 30 VDC

Off: 0 to 5 VDC

Input Current (voltage on)

2.35 mA ± 20% per channel

Counter Frequency

Square wave: 0 to 10 kHz

Digital Filtering Time Interval

Software configurable

Diagnostics

Input Wire-break Detection (current: 50 µA max., delay: 20 ms) Internal Field Circuit Supply Detection (17.5 VDC, 16 to 19 VDC)

I/O Type

Source

I/O Mode

DO or pulse output

(channel 1 to 8, group configurable by software)

Pulse Duration

500 µs

Protection

Output Short-circuit Protection

Common Power Input Over-voltage Protection Inductive Load Shutdown Voltage Protection

Diagnostics

Wire Break Detection (on state, output current < 3 mA)

Wire Break Detection (off state, output load impedance > 58 kilo-ohms) Output Short-Circuit Detection (output current > 0.87 A, range: 0.64 to 1.2 A) External Power Detection (17.5 VDC, 16 to 19 VDC)

Failsafe Configuration (hold last/failsafe state)

I/O Mode

65M-3600-CT-T: Current

65M-3610-CT-T: Voltage

I/O Type

Differential

Input Range

65M-3600-CT-T:

0 to 20 mA

4 to 20 mA

65M-3610-CT-T:

0 to 10 V

1 to 5 V

Overload Permitted on Inputs

65M-3600-CT-T: ±30 mA

65M-3610-CT-T: ±12 V

Measurement Resolution

65M-3600-CT-T:

2 µA (0 to 20 mA)

1.6 µA (4 to 20 mA)

65M-3610-CT-T:

1 mV (0 to 10 V)

0.4 mV (1 to 5 V)

Accuracy

±0.1% FSR @ 25°C

±0.3% FSR @ -40 to 75°C

Conversion Time

100 ms

Rejection Ratio

Normal mode: > 60 dB @ 60 Hz (min.), conversion time: 100 ms Common mode: > 90 dB @ 60 Hz (min.), conversion time: 100 ms

Input Impedance

65M-3600-CT-T: 250 ohms

65M-3610-CT-T: 1 mega-ohms

Diagnostics

65M-3800-3810-CT-T:

Input Underflow/Overflow Detection 65M-3600-CT-T:

Internal Loop Power Detection (17.5 VDA, 16 to 19 VDC) Input Short-circuit Detection

65M-3600-CT-T (in 4 to 20 mA mode): Input Wire-break Detection (delay: 0.8 s) 65M-3610-CT-T:

Input Wire-break Detection (delay:1.6 s max)

I/O Mode

Voltage/Current

Output Range

0 to 10 V

1 to 5 V

0 to 20 mA

4 to 20 mA

Converter Resolution

16-bit

Accuracy

±0.1% FSR @ 25°C

±0.3% FSR @ -40 to 75°C

Output Refresh Time

16 ms

Output Impedance

Voltage mode:

1 kilo-ohms (min.) Current mode: 750 ohms (max.)

Diagnostics

Output Short-circuit Detection (voltage) Failsafe Configuration (hold last/failsafe state) Output Wire-break Detection (current)

Connector

Screw-fastened terminal block

ID

65M-TB-1900-CT-T: D1

65M-TB-2901-CT-T: D2

65M-TB-3600-CT-T: A1

65M-TB-3610-CT-T: A2

65M-TB-4820-CT-T: A5

Dimensions

42.3 x 102.38 x 80.8 mm (1.67 x 4.03 x 3.18 in)

Weight

164 g (0.36 lb)

System Power

65M-1900-CT-T:

0.019 A @ 24 VDC (without internal field circuit supply)

0.115 A @ 24 VDC (32-channel dry contact with internal field circuit supply)

65M-2901-CT-T:

0.005 A @ 24 VDC

65M-3600-CT-T:

0.053 A @ 24 VDC (without internal loop power)

0.466 A @ 24 VDC (16-channel 20 mA current input with internal loop power)

65M-3610-CT-T:

0.038 A @ 24 VDC

65M-4820-CT-T:

0.022 A @ 24 VDC (without external load)

0.266 A @ 24 VDC (4 channels with 20 mA current output)

Field Power

65M-1900-CT-T/65M-2901-CT-T:

0.068 A @ 12 VDC

65M-3610-CT-T/65M-4820-CT-T:

0.069 A @ 12 VDC

65M-3600-CT-T:

0.073 A @ 12 VDC

Housing

Plastic

Dimensions

42 x 116 x 130 mm (1.65 x 4,57 x 5.12 in)

Weight

65M-1900-CT-T: 253 g (0.56 lb)

65M-2901-CT-T: 254 g (0.56 lb)

65M-3600-CT-T: 267 g (0.59 lb)

65M-3610-CT-T: 250 g (0.55 lb)

65M-4820-CT-T: 257 g (0.57 lb)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Note: Proper airflow is required in an environment with temperature > 65°C.

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Altitude

Up to 2000 meters1

EMC

EN 55032/35

EN 61000-6-2/-6-4

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: (DC) 1 kV; Signal: 1 kV

IEC 61000-4-5 Surge: Power: (DC) 0.5 kV L-N, 1 kV L/N-PE; Signal: 1 kV; IO: 0.5 kV IEC 61000-4-6 CS: Power: (DC) 10

Vrms; Signal: 10 Vrms

IEC 61000-4-8 PFMF: 30 A/m

Safety

UL 61010-1

UL 61010-2-201

Shock

IEC 60068-2-27

Half sine wave; acceleration: 15 g; time: 11 ms

Vibration

IEC 60068-2-6

DIN-rail mounted:

7 mm peak-peak (p-p) (2 to 8.42 Hz), 1 g (8.42 to 150 Hz) Rack mounted (with optional kit):

7 mm peak-peak (p-p) (2 to 8.42 Hz), 0.5 g (8.42 to 150 Hz)

Time

65M-1900-CT-T: 2,057,118 hrs

65M-2901-CT-T: 2,007,795 hrs

65M-3600-CT-T: 1,686,798 hrs

65M-3610-CT-T: 1,885,953 hrs

65M-4820-CT-T: 1,874,152 hrs

Standards

Telcordia Standard SR-332