EX9012FD Analog In 12bit module can easily be integrated to a RS485 network. It excels at use to measure analogue voltages in the measuring ranges ±150mV, ±500mV, ±1V, ±5V and ±10V or currents in the range of ±20mA. The Analog In 16bit module has 100 Hz high sampling rate. The Analog In RS485 module has a 4,5-digit 7-segment LED-display and can be used in a wide temperature range.
Features:
- Voltage measurement in measuring ranges from ±150mV to ±10V
- Up to 100Hz sampling rate
- 7-segment LED-display
- Output as RS485 interface
- In- and Output galvanically isolated
- Manual configuration or with supplied software
- Power supply 10 - 30VDC
Specifications
DualWatchdog |
Host Watchdog: |
yes |
Module Watchdog: |
yes |
RS-485 |
Ports: |
1 |
Speed: |
300~115200 bps |
Connector: |
screw terminal block |
Analog input |
Channels: |
1 differential |
Resolution: |
12 bit |
Total sample rate: |
100 Hz |
Voltage range: |
± 150 mV ± 500 mV ± 1 V ± 5 V ± 10 V |
Voltage impedance: |
20 MOhm |
Current range: |
± 20 mA (extern 125 Ohm Widerstand erforderlich) |
Current impedance: |
125 Ohm |
Sensor Input |
Accuracy: |
± 0.05 % |
Zero Drift: |
± 0.5 µV/°C |
Span Drift: |
± 25 ppm/°C |
Isolation: |
3000 V |
Connector: |
screw terminal block |
Digital input |
Channels: |
1 differential |
Logic 0: |
0 to 1 V |
Logic 1: |
3.5 to 30 V |
High/Low Alarm: |
yes |
Connector: |
screw terminal block |
Digital output |
Channels: |
2 open collector |
Switching Current DC: |
30 mA@30 V |
Connector: |
screw terminal block |
General specification |
Power consumption: |
1.9 W |
Operating Temperature: |
- 25 °C to + 75 °C |
Storage Temperature: |
- 40 °C to + 80 °C |
Included in delivery |
Din rail mounting kit: |
1 |
Wall mounting kit: |
1 |
Driver CD: |
1 |
|
|
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"