IDS-409-SFP Switch công nghiệp 9 cổng Compact DIN Rail của hãng Perle-Canada hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam.IDS-409-SFP được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng.Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, …
Tính năng của sản phẩm:
- 10/100/1000Base-T ( RJ45 ) ports for Gigabit and Fast Ethernet devices
- 100/1000Base-X SFP fiber ports (empty)
- IP Manageability, VLAN and resiliency management
- Digital inputs for generation of alerts
- Compact, corrosion resistant case attaches to a standard DIN Rail
- Redundant dual power input 12/24/48 VDC, 24 VAC
- Out-of-band management via RJ45 or USB serial ports
- Programmable Controller safety and Hazardous Location Certification
- -40 to 75C industrial operating temperature ( XT Models )
Thông số kỹ thuật của sản phẩm:
| Power |
| Dual Power Input |
Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.
12/24/48 VDC Nominal. ( 9.6 to 60 VDC)
24 VAC Nominal ( 18 to 30 VAC )
|
| Power Connector |
4-Pin Removable Terminal Block.
Grounding screw on metal chassis
|
| Maximum Current Consumption @24 vDC |
1 SFP = 0.66 amps
2 SFP = 0.58 amps
3 SFP = 0.61 amps
5 SFP = 0.61 amps |
| Maximum Power Consumption @24 vDC |
1 SFP = 15.8 watts
2 SFP = 14 watts
3 SFP = 14.7 watts
5 SFP = 14.7 watts |
| Overload Current Protection |
Fused overload current protection |
| Reverse polarity protection |
The positive and negative inputs can be reversed providing safe and simple power connectivity. |
| Access Ports |
| RJ45 |
4, 6, 7 or 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
|
| RJ45 Serial Console port |
RJ45 DTE
Optional rolled and straight thru RJ45 cables and DB adapters are available |
| Small Form Factor Pluggable ( SFP ) slot |
1,2 or 3 SFP slots for SERDES 100/1000Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs
SFPs supporting the SGMII protocol are also supported ( example 1000Base-T )
|
| USB Serial Console port |
MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections |
| Digital Inputs |
Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of on-board Alarm Relay,etc ) |
| Alarms |
- NC (Normally Closed ) or NO ( Normally Open ) dry contact.
- 1A @ 24V
|
| Switch Properties |
| Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
EEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
|
| Processing Type |
Store and Forward |
| MAC Address Table Size |
8K |
| VLAN ID range |
1 to 4000 |
| IGMP groups |
1024 |
| Packet Buffer Memory |
1 Mbit |
| Jumbo Frame Size |
10 KB |
| Indicators |
| Power |
This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs |
| System |
Indicates whether the switch O/S is operating normally |
| RJ45 Ethernet |
These integrated colored LEDs indicate link, activity and speed for each port. |
| Fiber Link |
Fiber link LED indicates Link and Data Activity |
| Alarm |
The alarm LED ( Red ) will be turned on under alarm conditions |
| P-Ring Master LED |
Status of the P-Ring Master |
| Backup Network Coupling |
Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links connecting two P-Ring networks ) |
| External Configuration DIP Switches |
| S2 |
When enabled, designates this switch as the Ring Master |
| S1 |
Activate Backup Coupling between 2 ring networks |
| Environmental Specifications |
| MTBF |
1 SFP = 123,553 Hours
2 SFP = 121,803 Hours
3 SFP = 120,102 Hours
5 SFP = 116,839 Hours
Calculation model based on MIL-HDBK-217-FN2 @ 30 °C |
| Operating Temperature Ranges |
Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40 F to 167° F )
|
| Storage Temperature Range |
Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models |
| Operating Humidity Range |
5% to 90% non-condensing |
| Storage Humidity Range |
5% to 95% non-condensing |
| Maximum Heat Output |
1 SFP = 53.9 Btu/hr
2 SFP = 47.8 Btu/hr
3 SFP = 50.2 Btu/hr
5 SFP = 50.2 Btu/hr |
| Operating Altitude |
Up to 3,048 meters (10,000 feet) |
| Chassis |
Metal with an IP20 ingress protection rating |
| Din Rail Mountable |
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit
|
| Product Weight and Dimensions |
| Weight |
1.5 kg |
| Dimensions |
75 x 130 x 121mm |
| Packaging |
| Shipping Weight |
2.0 kg |
| Shipping Dimensions |
170 x 260 x 70 mm |
Mã sản phẩm:
|
Model
|
Temp
|
RJ45 ports
10/100/1000Base-T
|
SFP Slots (empty)
100Base-X
1000Base-X
|
|---|
|
IDS-409-1SFP
|
Std
|
8
|
1
|
|
IDS-409-1SFP-XT
|
Ind
|
8
|
1
|
|
IDS-409-2SFP
|
Std
|
7
|
2
|
|
IDS-409-2SFP-XT
|
Ind
|
7
|
2
|
|
IDS-409-3SFP
|
Std
|
6
|
3
|
|
IDS-409-3SFP-XT
|
Ind
|
6
|
3
|
|
IDS-409-5SFP
|
Std
|
4
|
5
|
|
IDS-409-5SFP-XT
|
Ind
|
4
|
5
|
Các bài viết tham khảo:
"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"
bkaii.com.vn
BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!
