I-7565-H1: Bộ chuyển đổi tín hiệu USB sang 1 cổng CAN Bus

Giá: Liên hệ

I-7565-H1 Bộ chuyển đổi USB sang 1 cổng CAN Bus của hãng ICP-DAS-Taiwan hiện đang được BKAII phân phối rộng rãi tại thị trường Việt Nam. I-7565-H1 được thiết kế theo tiêu chuẩn công nghiệp, nhỏ gọn, dễ dàng lấy được tín hiệu về PLC, máy tính, vi xử lý, máy tính nhúng. Sản phẩm hiện đang được sử dụng trong các bài toán M2M, IoT của các lĩnh vực: Điện lực, khí tượng thủy văn, giao thông thông minh, hệ thống kiểm soát an ninh…

Bộ chuyển đổi tín hiệu CAN sang USB/RS232/485/422

Tính năng của sản phẩm:

RoHS Design
Fully compliant with USB 1.1/2.0(Full Speed)
Fully compatible with the ISO 11898-2 standard
Support both CAN2.0A and CAN2.0B
No external power supply (powered by USB)
Integrated with one or two CAN bus channels
Programmable CAN bus baud rate from 5Kbps to 1Mbps or user-defined baud rate
Support CAN bus acceptance filter configuration
Time-stamp of CAN message with at least ±1ms precision
Support firmware update via USB
Provide utility tool for users module setting and CAN bus communication testing conveniently
Provide API library for users' program development easily
Provide "Hardware Serial Number" to protect users' program
(For FW v1.04 and libary v1.07 or newer) (NEW)
Provide “Listen Only Mode” function
(For FW v1.05 and Utility v1.09 or newer) (NEW)
Provide "CAN Error Frame" Information
(For FW v1.07 or newer) (NEW)
Provide "Adjustable Bit-Timing of CAN Baud (Tseg2)" function
(For FW v1.07 or newer) (NEW)
Increase HWSendTimer Number from 1 set to 5 sets and add “AddMode” and ”AddVal” parameter for HWSendTimer
(For FW v1.05 or newer) (NEW)
Add “User Defined ISR” interrupt function
(For API v1.08 or newer) (NEW)
Add Driver Signature Certificate for Win7 x64 platform in driver v1.2
Provide PWR / RUN / ERR indication LED
Built-in jumper to select 120 ohm terminal resister
Max data flow flow Windows 2000/xp, win7(32 & 64 bit), Linus and WinCE (available soon)
The CAN buffer is 256 data frames for I-7565-H1 and 128 data frames in each CAN port for I-7565-H2.
Watchdog inside
Driver supported for Windows 2K/XP/Vista/7 (32 & 64 bit)/8.x, and Linux

Thông số kỹ thuật của sản phẩm:

Item	I-7565-H1	I-7565-H2
Hardware
CAN Port Channels	1	2
CAN Interface
Transceiver	NXP 82C250	NXP 82C250
Connector	9-pin D-sub connector	10-pin terminal-block connector
Baud Rate (bps)	5K ~ 1Mbps or User-defined baud rate	5K ~ 1Mbps or User-defined baud rate
Isolation	3000VDC for DC-to-DC 2500Vrms for photo-couple	3000VDC for DC-to-DC 2500Vrms for photo-couple
Terminal Resistor	Selectable 120Ω terminal resistor by jumper	Selectable 120Ω terminal resistor by jumper
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B	ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment	C.I.A. DS-102 (CAN_H=7, CAN_L=2)	(CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9, CAN_L=7 )
Receive Buffer	256 data frames	128 data frames for each CAN port
Max Data Flow	3000 fps	3000 fps (Total CAN ports)
USB Interface
Connector	USB Type B	USB Type B
Transmission speed	12M kbps	12M kbps
Specification	USB 1.1 and USB 2.0 standard	USB 1.1 and USB 2.0 standard
Receive Buffer	100 data frames	100 data frames
LED
Round LED	PWR / RUN /ERR LED	PWR / RUN /ERR LED
Software
Driver	Windows 2K/XP/7/8/10, Linux	Windows 2K/XP/7/8/10, Linux
Power
Power supply	By USB interface	By USB interface
Power Consumption	1.5 W	1.5 W
Dip Switch	Init (Firmware Update) / Normal (Firmware Operation)	Init (Firmware Update) / Normal (Firmware Operation)
Mechanism
Installation	DIN-Rail	DIN-Rail
Dimensions	108mm x 72mm x 35mm (H x W x D)	108mm x 72mm x 35mm (H x W x D)
Environment
Operating Temp.	-25 ~ 75 ℃	-25 ~ 75 ℃
Storage Temp.	-30 ~ 80 ℃	-30 ~ 80 ℃
Humidity	10 ~ 90% RH, non-condensing	10 ~ 90% RH, non-condensing

Ordering Information

I-7565-H1 CR	High Performance Intelligent USB to 1-port CAN bus converter (RoHS)
I-7565-H2 CR	High Performance Intelligent USB to 2-port CAN bus converter (RoHS)
Include Cable	CA-USB18(1.8M Cable)x1

Các bài viết tham khảo:

"BKAII - Thiết bị truyền thông TỐT nhất với giá CẠNH TRANH nhất!"