IES6300-8GHP2GS2HS-2P48-360W: 12-Port Gigabit Layer 2 Managed Industrial PoE++ Ethernet Switch

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

IEEE 802.3bt for PoE++

The total power of PoE supports 360W and supports the mixed plug-in of devices of IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt standards

PoE supports enabling and disabling port power supply

PoE supports power supply priority. When the power is overloaded, it can power high priority device first

PoE supports delayed power supply to avoid the instant power supply shock when powering on the device

PoE supports detecting the status of power receiving devices automatically. When the power receiving device fails, the power supply port can be closed and reopened to restart the power receiving device and solve the problem of power receiving device crash

Gigabit PoE port: 10/100/1000Base-T(X) self-adaption, RJ45, Full/Half Duplex, MDI/ MDI-X self-adaption. The single port supports 15.4W PoE output power of IEEE802.3af standard and 30W PoE+ output power of IEEE802.3at standard, power supply pin: 1/2-, 3/6+; 90W PoE++ output power of IEEE802.3bt standard, power supply pin: 1/2-, 3/6+, 4/5-, 7/8+

Gigabit SFP Slot : 100/1000Base-X self-adaption or forced mode, SFP slot

2.5G SFP Slot: 100/1000/2.5G Base-X self-adaption or forced mode, SFP slot

I/O port: Support 2 DI and 2 DO, 8-pin 3.81mm pitch terminal blocks, support dry contact input and relay-type output

Console port: CLI command line management port(RS-232), RJ45

Alarm port: 6-pin 5.08mm pitch terminal blocks (relay occupies 2 pins), support 1 relay alarm output, the current load capacity is 1A@30VDC or 0 3A@125VAC>

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 4Mbit

Backplane bandwidth: 30G

Switch delay: <10μs

Power input: 50~ 55VDC

Connection method: 6-pin 5.08mm pitch terminal blocks (includes 4-pin power supply)

Power supply quantity: dual power supply redundancy backup

Connection protection: anti-reverse connection

Overcurrent protection: 7.5A

No-load: ≤ 5.5W@50VDC

Full-load: ≤ 380W@50VDC (with 360W PoE load)

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%～95% (no condensation)

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Dimension (W x H x D): 62mm×150mm×135mm

IEC 6100042 (ESD, electrostatic discharge), Level 3

IEC 6100044 (EFT, electrical fast transient pulses), Level 3

IEC 61000-4-5 (Surge), Level 3

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6