IES6220-16T4GS-2P48: 20-port 100M/Gigabit Layer 2 Managed Industrial PoE Ethernet Switch

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

EEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.3ad for LACP

IEEE802.1AB for LLDP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

The maximum power of single PoE port: 30W

The power supply pin of PoE: V+, V-, V+, V- correspond to Pin 1, 2, 3, 6

100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning

100M PoE copper port: 10/100Base-T(X) RJ45, automatic flow control, full/half duplex mode, MDI/MDI-X autotunning, POE port, output power of 15W or 30W

Gigabit SFP port: 1000Base-SFP

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 6-pin 5.08mm pitch terminal blocks, including 2-pin alarm terminal blocks, support 1 relay alarm output, current carrying capacity is 1A@30VDC or 0.3A@125VAC>

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 3Mbit

Backplane bandwidth: 12.8G

Switch time delay: <10μs

Optional 24VDC, 48VDC or 220VAC, 6 pins 5.08mm pitch terminal blocks, including 4 pins power supply terminal blocks

DC dual power supply redundancy, anti-reverse connection

DC products

No-load: ≤157W@48VDC>

Full-load: ≤157.2W@48VDC>

AC products

No-load: ≤9.2W@220VAC>

Full-load: ≤9.6W@220VAC>

Operating temperature range: -40~75℃

Storage temperature range: -40~85℃

Relative humidity: 5%～95%(no condensation)

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 70mm×160mm×130mm

Weight: ≤1.6kg

IEC 61000-4-2 (ESD), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT), Level 3

Power supply:±2kV

Ethernet port: ±1kV

Relay: ±2kV

IEC 61000-4-5 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

Ethernet port: common mode±2kV, differential mode±1kV

Relay: common mode±2kV, differential mode±1kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6